Promat Promaseal A Acrylic Sealant

  • Ideal for sealing around small gaps, with or without penetrating elements
  • Available in white or grey
  • Supplied in 300ml cartridges, 600ml sausages and 10 litre buckets
  • Ideal for sealing around metal pipes, cables, conduits and ducts which penetrate walls or floors
  • Bonds easily to masonry, concrete, fibre cement, calcium silicate board, plasterboard, metal and cable coverings
  • Remains flexible after curing; can accommodate thermal movement
  • For metal pipes passing through walls the gap should be no more than 20mm
  • For metal pipes passing through concrete floors the gap should be no more than 30mm
  • For cable bundles passing through walls, the maximum opening is 30mm
  • For cable bundles passing through floors, the maximum opening is 50mm
  • For cable trays passing through walls, the maximum opening size is 70mm x 440mm
Contact us

More images

  • Description
  • Resources

Promaseal®-A is a water based acrylic sealant. The advantage of this environmentally friendly water based sealant is in making post installation and site clean up easier.
If installed correctly, once cured Promaseal®-A should not crack and it can be simply overpainted. It has a good resistance to water characteristics and some movement capabilities. Note that:
Promaseal®-A is water resistant once fully cured. However, it is not recommended for external use.
The sealant should not be used where continuous water immersion is likely.
The sealant is not recommended for use in wet or damp areas where ambient humidity is consistently high, e.g. bathrooms.
The sealant is not recommended for use in around services where high movement may be expected. It is not recommended for use around services that require more than ±15% movement.
Promaseal®-A is supplied in 300ml cartridges, 600ml foils and 10 litre pails.

Download Promat Promaseal A Acrylic Sealant Datasheet View file